Payment & Shipping Terms:
|Coil Width:||1200mm||Main Frame:||300 H Steel|
|Name:||Corrugated Sheet Roll Forming Machin||Cutter Materia:||Cr12 Heat Treatment|
|Diameter Of Shaft:||70mm||Cut Mode:||Hydraulic Forming After Cutting Off|
|Worrking Speed:||3-5 Meters/minute||Machine Power:||4 Kw|
plc glazed tile roll forming machine,
step glazed tile roll forming machine,
plc control glazed tile machine
PLC Control Step Glazed Tile Roll Forming Machine Building Roofing Panel
1. PLC Control Step Glazed Tile Roll Forming Machine Building Roofing Panel
-- Lifetime seivices
-- Introduced Mitsubishi PLC with touch screen to machine controll system.
-- One worker operation (minimum)
-- Lifetime>10years: roller cover with 0.05mm chrome
-- Cr12 mould steel cutter with quenched treatment.
-- Product cut-to-length.
-- Technician overseas installing and training available.
2. PLC Control Step Glazed Tile Roll Forming Machine Building Roofing Panel Parameters:
|Material||Type||Color steel sheet|
|Thickness(mm)||0. 4 -0. 6|
|Yield strength(mpa)||235 -345|
|Roller material||45#Chrome steel|
|Forming speed(m/min)||About 1500-2000mm/min or 4-5m/min. For option|
|Step distance||Adjustable according to requirement (>=250mm)|
|Speed adjusting mode||AC Frequency|
|Roller drive||Decelerating motor + Chain drive|
|Cutting mode||Hydraulic cutting|
|Cutter material||Cr12 mold steel|
|Control mode||Mitsubishi PLC|
|Operating mode||Button + Mitsubishi Touch screen|
|Main motor power(kw)||7.5KW (Depend on final design)|
|Hydraulic station power||5.5K W (Depend on final design)|
|Uncoiler's loading capacity||Max. Capacity: 5000kgs
(can be increased to be 10T)
|Machine`s size||About 12*1.7*1.4m (Depend on final design)|
|Machine weight||About 9000kgs|
Decoiler--Manual prectting--Material Guiding--Roll forming M/C--Hydraulic System--Post Cutting--Exit Rack
This machine takes GI/PPGI as raw material, through a series steps and can produce the barrel type roofing sheets.
The inverter controls the motor speed, the PLC system controls length and quantity automatically, therefore, the machine achieves a continuous automatic production, which is the ideal equipment for cold roll forming industry.
A. If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also trainyour workers/technician face to face.
B. Without visiting, we will send you user manual and video to teach you to install and operate.
C. If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.
Contact Person: Mr. jack
Tel: +86 18932785588